Universal EZ Installer/Snap Key
      Back to home
      1. Help Center
      2. Universal EZ Installer
      3. Universal EZ Installer/Snap Key

      FOR KEY 950 Instructions - Universal EZ Installer

      1. Open the app
      2. Select Key Pairing
      3. Scan barcode on UEZI dongle
      4. Go to Bluetooth Phone Settings
      5. Pair EZ Installer to mobile device
      6. Plug Dongle into OBD Port
      7. Open the app again and wait for green "connected" to show on OBD Port Screen
      8. Turn the Ignition to ON with the new key
      9. Select the number of keys you want to pair to the vehicle
      10. Device will communicate with the vehicle from this point for 5-10 minutes
      11. Turn the ignition off within 60 Seconds once communication finishes
      12. Insert the new key and turn the ignition to the ON position
      13. Close the app once "key pairing complete" is displayed
      14. Reinsert key & start the car to test the key