Universal EZ Installer/Snap Key
      Back to home
      1. Help Center
      2. Universal EZ Installer
      3. Universal EZ Installer/Snap Key

      FOR 410 Smart Key Instructions - Universal EZ Installer

      1. Open the app
      2. Select Key Pairing
      3. Scan barcode on Universal EZ Installer dongle
      4. Enter YMM
      5. Select Smart Key Type
      6. Download Vehicles Data Pack
      7. Plug Dongle into OBD Port
      8. Go to Bluetooth Phone Settings & Pair EZ Installer to mobile device
      9. Return to the app and wait for a green "connected" to show on the OBD Port Image in the App
      10. Turn the Ignition to the "ON" position within the timed 30 seconds
      11. Select the number of new keys you want to pair to the vehicle
      12. Device will communicate with vehicle
      13. Insert the new key that you are pairing into the slot in the center console compartment (See image below)
      14. The app will pair the new key to the vehicle
      15. Close the app once "key pairing complete" is displayed
      16. Test new key to verify all functions are working properly

      mceclip0.png