Universal EZ Installer/Snap Key
      Back to home
      1. Help Center
      2. Universal EZ Installer
      3. Universal EZ Installer/Snap Key

      FOR KEY 600 Instructions - Universal EZ Installer

      1. Open Application
      2. Select Key Pairing
      3. Scan barcode on Universal EZ Installer dongle
      4. Enter YMM
      5. Select Key or Remote type
      6. Download Vehicles Data Pack
      7. Plug Dongle into OBD Port
      8. Go to Bluetooth Phone Settings & Pair EZ Installer to mobile device
      9. Return to the App and wait for a green "connected" to show on the OBD Port Image in the App
      10. Turn the Ignition to the "ON" position within the timed 30 seconds
      11. Select the number of keys you want to pair to the vehicle
      12. Device will communicate and pair key to vehicle from this point
      13. Close Application once "key pairing complete" is displayed
      14. Remove key from ignition then reinsert key & start the car to test the key