1996 - 1997 Plymouth Grand Voyager, 1997 Plymouth Prowler, 1996 - 1997 Plymouth Voyager Remote Programming Instructions

1. Insert key and turn to the RUN position (as far forward you can go WITHOUT cranking the engine). Wait for the chime sound to stop.
2. Using your existing, programmed remote, press and hold down the UNLOCK button for between 4 and 10 seconds.
3. During this time continue to hold down the UNLOCK button and press the PANIC button on the existing, programmed remote for 1 second and release all buttons. Within three seconds, you'll hear a chime indicating you have successfully entered programming mode.
4. Within 30 seconds, press a button on all remotes to be programmed, including the existing programmed remote. If done correctly, you'll hear a chime after each is programmed into the system.
5. To exit programming mode, turn the ignition to the OFF position.
6. Remove key, exit vehicle, close door, and test remote(s) for functionality.