1991 - 1996 Infiniti G20 Touring Remote Programming Instructions

NOTE: Instructions for models with no automatic seatbelts and only models with leather seats and a sunroof. A total of four (4) remotes can be programmed to function on the same vehicle.

 

  1. Open the trunk.
  2. Close and lock all doors.
  3. Insert and remove the key from the ignition six times within 10 seconds.
  4. Manually unlock and lock the driver's door once to enable "Belting" mode.
  5. Push lock button on the new remote controller once, within 5 seconds of completing step 4.
  6. If additional remotes are needed, repeat steps 4 and 5 for each additional remote immediately after Programming the first remote.