NOTE: You must have two (2) functioning and programmed keys in order to program an additional key. If you do not have two (2) existing programmed keys, call an automotive locksmith for a replacement.
- Insert an existing working key into the ignition
- Turn the ignition cylinder to ON (RUN) and back to OFF
- Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN) then back OFF.
- Remove the second working key and insert the new key before ten seconds have elapsed and turn it to ON (RUN).
- Leave it on for one second and turn it back to OFF.
- The security light will light up for three seconds to indicate that the new key has been successfully programmed.