2003 - 2005 Mazda MAZDA6 Remote Programming Instructions

1. Open the driver's door and leave it open.
2. Lock and Unlock the driver's door using the power lock switch on the door panel.
3. Insert the key into the ignition.
4. Turn the key to the ON and OFF position three times in 10 seconds. Leave the key in the ignition.
5. Open and close the driver's door three times ending with the door in the open position.
6. Door locks should respond by locking and unlocking.
7. Press any button on the remote two times. Doors should then lock and unlock.
8. If Programming a second remote press any button on it two times and door locks should lock and unlock.
9. Remove the key from the ignition and locks should lock and unlock again.
10. Test Remotes