NOTE: You must have two valid working keys to add a new key to the system. If you do not have 2 valid working keys you will have to call a Locksmith to program or originate a key for you.
- Insert the first valid key into the ignition switch.
- Turn the ignition switch to the ON position for 5 seconds.
- Turn the ignition switch to the OFF position and remove the first key.
- Insert the second valid key and switch the ignition switch to the ON position within 7 seconds. Theft-alarm indicator will blink twice.
- Turn the ignition switch to the OFF position and remove the second key.
- Insert a NEW blank key into the ignition and switch the ignition to the ON position within 7 seconds. The theft-alarm indicator will illuminate for about 3 seconds when the Programming is completed.
- If an error occurs, the indicator will flash 3 times.
- Repeat step 4 if you want to register additional keys.
- Be sure to complete the entire Programming process within the 30 seconds after the theft-alarm indicator flashes in step 3.