2004 - 2009 Scion tC, 2004 - 2007 Scion xB, 2004 - 2006 Scion xA Remote Programming Instructions

1. Driver's door open, key removed from ignition switch.
2. Within 5 seconds, insert and remove the key from the ignition switch twice.
3. Within 40 seconds, close and open the driver's door twice.
4. Insert and remove the key from the ignition switch.
5. Within 40 seconds, close and open the driver's door twice.
6. Insert the key into the ignition switch and close the driver's door.
7. Switch ignition ON and OFF once to program a remote while retaining the original codes. Switch ignition ON and OFF twice to program remote while erasing the original code. Switch ignition ON and OFF three times to check how many remotes are currently registered or five times to erase all registered remotes.
8. Remove the key from the ignition switch.
9. System should now lock and unlock the vehicle. Once, twice, or five times depending on which mode has been selected. Once to four times, slowly, to indicate how many remotes are programmed.
10. Within 40 seconds: Press and release LOCK and UNLOCK buttons simultaneously.
11. Within 3 seconds: Press remote LOCK or UNLOCK button.
12. System should now LOCK and UNLOCK the vehicle. Once to confirm registration, twice to indicate Programming has failed.
13. Within 40 seconds, repeat step 10 to program additional remotes. Up to 4 remotes can be programmed.
14. To exit Programming mode, open the driver's door.