Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1995 Chevrolet CK-Series Truck, 1995 Chevrolet Suburban, 1995 Chevrolet Tahoe pre-OBD II Remote Programming Instructions

      mceclip0.png

      1. Locate the Data Link Connector (DLC) underneath the driver's side dashboard. Use the figure as a map for your DLC ( They are not lettered on your vehicle.)
      2. Connect cavity G to a ground. Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
      3. Press the lock or unlock button on the first remote to be programmed. Locks will lock and unlock verifying remote was programmed.
      4. Press the lock or unlock button on the second remote to be programmed if applicable.
      5. Locks will lock and unlock to verify the remote was programmed.
      6. Remove jumper wire and test remote(s)