Instructions for Models: 2006-2011 Cadillac DTS, 2009-2010 Cadillac Escalade, 2007-2010 GMC Acadia
NOTE: This vehicle can have a maximum of eight remotes programmed. This information is also in your owner's Manual in the Drivers Information Center Section.
- Insert Key and turn to ON position so you can access Driver Information Center
- Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
- Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
- Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programed. On vehicles with memory recall seats, the first remote learned will match Driver 1 and the second will match Driver 2.
- To program additional remotes at this time repeat step three.
- To exit Programming mode turn key off and remove key.
- Test remote(s).