Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1992 - 1996 Chevrolet, Buick, GMC, Oldsmobile, Pontiac Remote Programming Instructions (Select Models)

      Instructions for Models: 1992-1993 Buick Park Avenue, 1994 Chevrolet Blazer, 1994 GMC Jimmy, 1995 GMC Safari, 1994 GMC Sonoma, 1995 GMC Suburban, 1995-1996 GMC Yukon, 1994 Oldsmobile Bravada, 1994-1995 Pontiac Firebird

      1. Locate the Data Link Connector (DLC) underneath the driver's side dashboard. Use the figure as a map for your DLC (they are not lettered on your vehicle.)
      2. Connect cavity G with a ground using a fused jumper wire. Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
      3. Press any button on the first remote to be programmed. Locks will lock and unlock verifying remote was programmed.
      4. Press any button on the second remote to be programmed if applicable. Locks will lock and unlock to verify the remote was programmed.
      5. Remove jumper wire and test remote(s).