Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1992 - 1993 Buick, Oldsmobile, Pontiac Remote Programming Instructions (Select Models)

      Instructions for Models: 1992-1993 Buick LeSabre, 1992-1993 Oldsmobile Eighty Eight, 1992-1993 Pontiac Bonneville

      1. Locate the Data Link Connector (DLC) underneath the driver's side dashboard.  Use the figure as a map for your DLC (These are not lettered on your vehicle.)

      1. Connect G with A using a fused jumper wire. Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
      2. Press any button on first remote to be programmed. Locks will lock and unlock verifying remote was programmed.
      3. Press any button on second remote to be programmed if applicable. Locks will lock and unlock to verify remote was programmed.
      4. Remove jumper wire and test remote(s)