NOTE: You must have two valid keys to add a new key to the system.
NOTE: If you do not have 2 valid working keys you will have to call a locksmith to program or originate a key for you.
- Insert the first valid key into the ignition switch.
- Turn the ignition switch to the ON/RUN position for at least three seconds, but no longer than 15 seconds.
- Turn the ignition switch to the LOCK position and remove the first key.
- Insert the second valid key into the ignition switch.
- Turn the ignition switch to the ON/RUN position within 15 seconds. After 10 seconds, a chime will sound. In addition, the Vehicle Security Light will begin to flash.
- Turn the ignition switch to the LOCK position and remove the second key.
- Insert the new key into the ignition switch.
- Turn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound. In addition, the Vehicle Security Light will stop flashing. To indicate that Programming is complete, the Vehicle Security Light will turn on again for a few seconds and then turn off.
- The new key is now programed.
- The Remote Keyless Entry remote will also be programed during this procedure. Repeat this procedure to program up to eight keys.