Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1993 - 1996 Buick Century, 1994 - 1996 Buick Roadmaster, 1993 - 1996 Buick Skylark, 1993- 1996 Oldsmobile Achieva Remote Programming Instructions

      NOTE: A maximum of only two keyless remotes can be programed. Remove programming connector jumper wire to exit programming mode.

      1. Locate the green programming connector located in the left hand side of the trunk. Trim may have to be pulled back to access the programming connector. (The connector has wires leading up to it, and it is not connected to anything.)
      2. Jump programming connector terminals. System should now lock and unlock doors and trunk lid to indicate programming mode has been entered.
      3. Trunk lid must have been activated before proceeding.
      4. Press any button on keyless remote once.
      5. System should now lock and unlock doors and trunk lid, indicating successful programming of keyless remote.
      6. Trunk lid must have been activated before proceeding.
      7. Repeat step 4 for additional remote or other existing keyless remote. 
      8. Test remote(s).