2003 - 2006 Kia Sedona Remote Programming Instructions

NOTE: Only two remotes can be programmed to this vehicle.

1. Open Hood and locate diagnostic connector near battery
2. Jump pin 5 to pin 17 with a suitable jumper wire.
3. Turn ignition to the ON position. ( DO NOT START)
4. Press the LOCK button of the first remote two times.
5. Press the LOCK button on the second remote two times (if applicable).
6. Turn ignition OFF and remove the key.
7. Disconnect jumper from diagnostic connector.
8. Check for lock and unlock operation. Horn will sound when locking.