Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      2007 - 2009 Cadillac SRX Remote Programming Instructions

      NOTE: This vehicle can have a maximum of eight remotes programmed. This information is also in your owner's Manual in the Drivers Information Center Section.

      1. Insert Key and turn to ON position so you can access Driver Information Center
      2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
      3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
      4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. (On vehicles with memory recall seats, the first remote learned with match driver 1 and the second will match driver 2.) A chime will sound indicating that the remote is programmed.
      5. To program additional remotes at this time repeat step 4. 
      6. To exit Programming mode turn the key off and remove the key. Test remote(s).