Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1995 - 1996 Chevrolet Impala, 1996 Chevrolet Cavalier, & 1996 Pontiac Sunfire Remote Programming Instructions

      1. Access the programming connector located in the LH side of the trunk.
      2. Jump programming connector terminals.
      3. The system should now cycle the door locks to indicate programming mode has been entered.
      4. Press any button on keyless remote once.
      5. System should now cycle the door locks, indicating successful programming of keyless remote.
      6. Repeat step 4 for additional remote or other existing keyless remote.
      7. Remove programming connector jumper wire to exit programming mode.
      8. Test remote(s).