1991 - 2000 Ford, Lincoln, Mercury Remote Programming Instructions (Select Models: See Attached List)

Important Note: See attached list to verify your vehicles year, make, and model are listed and that these are the correct programming steps for your vehicle.

1. Turn ignition to run or ACC.
2. Momentarily jump the pins in the programming connector located at the base of the steering column.
3. All doors will lock then unlock to confirm programming mode.
4. Press any button on first keyless remote.
5. Door locks will cycle to confirm programming.
6. If programming a second keyless remote, press any button on second keyless remote.
7. Door locks will cycle to confirm programming.
8. Turn ignition to off.
9. Locks will again cycle to indicate end of programming mode.