Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1997 Acura CL Remote Programming Instructions

      1. Turn the ignition to the on position (II on the ignition).
      2. Within 1-4 seconds, push the remote lock or unlock button with the remote aimed at the keyless receiver unit (just at the steering wheel is fine).
      3. Within 1-4 seconds, turn the ignition to off
      4. Within 1-4 seconds, turn the ignition to the on position (II).
      5. Within 1-4 seconds, push the remote lock or unlock button with the remote aimed at the receiver again.
      6. Within 1-4 seconds, turn the ignition off.
      7. Within 4 seconds, turn the ignition to the on position (II).
      8. Within 1-4 seconds, push the remote lock or unlock again.
      9. Within 4 seconds, turn the ignition off.
      10. Within 4 seconds, turn the ignition on.
      11. Within 1-4 seconds, push the remote again. Confirm you can hear the sound of the door actuators.
      12. Within 1-4 seconds, push the "trans" lock or unlock button again.
      13. Within 10 seconds, aim the remotes (up to three), whose codes you want to store, at the receiver, and press the remote lock or unlock buttons.
      14. Confirm that you can hear the sound of the door lock actuators after each remote code is stored.
      15. Turn the ignition switch off, and pull out the key.
      16. Test remote(s)