Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      2001 - 2007 Buick Rendezvous & Pontiac Aztek Remote Programming Instructions

      Instructions for Models: 2002-2007 Buick Rendezvous & 2001-2005 Pontiac Aztek

      1. Close all doors.
      2. Press and hold the unlock button on the door lock switch on the driver's door. Hold until instructed to release later in the instructions.
      3. Insert and remove the key from the ignition 2 times. Do not turn the ignition.
      4. Insert the key in the ignition a third time and leave the key in the ignition. Do not turn the ignition.
      5. Release the door lock switch on the driver's door panel.
      6. A chime will sound 3 times indicating that you are in programming mode.
      7. Press both the lock and unlock buttons on the remote for up to 30 seconds.
      8. A chime will sound 2 times if the remote has been programmed successfully.
      9. Repeat step 7 if you are programming additional remotes.
      10. Remove the key from the ignition to exit programming mode.