Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1990 - 1996 Nissan & Infiniti Remote Programming Instructions (Select Models)

      Instructions for Models: 1990-1996 G20, J30, Q45, 300ZX


      1. Open the trunk.
      2. Close and lock all doors.
      3. Insert and remove the key from the ignition six times within 10 seconds.
      4. Manually unlock and lock driver's door once to enable "Belting" mode.
      5. Push lock button on the new remote controller once, within 5 seconds of completing step 4.
      6. If additional remotes are needed, repeat steps 4 and 5 for each additional remote immediately after programming the first remote.

      NOTE: A total of four (4) remotes can be programed to function on the same vehicle.