1998 - 2006 Chevrolet, Buick, Cadillac, GMC, Hummer, Isuzu, Oldsmobile Remote Programming Instructions (Select Models: See Attached List)

NOTE: Verify your vehicle is on the attached list of compatible vehicles before attempting these programming steps.

1. Close all vehicle doors. Insert the key into the ignition.
2. Hold down the power unlock button on the driver's door panel continue to hold down until instructed to release in step 9.
3. Perform steps 4 through 8 in fairly rapid succession.
4. Turn the ignition switch to the on position (as far as you can go without starting the engine).
5. Turn the ignition switch to the off position.
6. Turn the ignition switch to the on position.
7. Turn the ignition switch to the off position.
8. Release the power unlock button on the door panel.
9. The vehicle will lock and unlock the doors automatically.
10. Hold down the lock and unlock buttons on the remote simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat step 10 now for each additional remote (including any existing remotes). Turn the ignition switch to the on position in order to exit the remote programming mode.