1996 - 2002 Mercury Villager Remote Programming Instructions

1. Enter vehicle. Close and lock all doors using the power lock switch on the driver's door.
2. Insert and remove (do not turn) the key from the ignition at least 6 times within 10 seconds.
3. Tail lamps will flash to indicate original code has been erased.
4. Insert and turn the key to the ACC position.
5. Press the lock on the first keyless remote.
6. Tail lamps will flash to confirm programming.
7. To add additional remotes, unlock and then lock the doors using the power lock switch on the driver's door.
8. Press the lock button on second keyless remote.
9. Tail lamps will flash to confirm programming.
10. Open the driver's door, and turn the ignition off.