Key & Remote Programming Instructions
      Back to home
      1. Help Center
      2. Remote Programming Instructions
      3. Key & Remote Programming Instructions

      1993 - 1996 Chevrolet Corvette Remote Programming Instructions

      1. Move all keyless remotes out of range of vehicle (10 to 15 feet).
      2. Turn ignition key to the on position.
      3. Push the trip/odometer button on the DIC (Driver Info Center) twice.
      4. Within 5 seconds, push & hold the fuel info button on the DIC until the PKE light comes on and stays on.
      5. Turn the ignition to the off position, but leave the key in the ignition. The PKE light will begin flashing.
      6. Bring one keyless remote into range. The PKE light will stop flashing and stay on to show the code is stored.
      7. Move the keyless remote out of range. The PKE light will begin flashing indicating the system is ready for the next keyless remote.
      8. If more than one keyless remote is being programed, move the first keyless remote out of range and repeat step 6 for any additional keyless remotes. Up to three keyless remotes can be programed.
      9. To turn off the programming mode, simply remove the key from the ignition, or turn the ignition switch on. The programming mode will shut off after two minutes if you have not programed any keyless remotes. Remove the key from the ignition. After three keyless remotes have been programed.