1996 - 2006 Dodge, Chrysler, Mitsubishi Vehicles Remote Programming Instructions (Select Models)

Instructions for Models: 2001 - 2005 Dodge Stratus Coupe, 2004 Chrysler Sebring 2DR Coupe, 1996-1999 Mitsubishi 3000GT, 1999-2004 Mitsubishi Diamante, 1996-2006 Mitsubishi Eclipse, 2004-2006 Mitsubishi Endeavor, 1995-1996 Mitsubishi Expo, 1999-2006 M

1. Locate the Data Port/OBD2 Port. (Most commonly located on driver's side under steering column)
2. Insert the key into the ignition and leave in the off position.
3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port with a suitable jumper wire, leave jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4.
4. Within 10 seconds after connecting the jumper wire, turn the ignition switch to the ACC position and then back to off. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode.
5. Press the lock button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once.
6. If there are two remotes, register the first, then register the second.
7. Repeat step 5 within one minute to program second remote.
8. After completing the second programming, the doors will lock and unlock once.
9. Disconnect the programming wire and remove the keys from the ignition.